The Sling Adapter Plate is designed to create an attachment point for single or two point slings on weapons that do not have a factory mount. Available for the AR-15/M-16 rifle,  and the Remington 870, Benelli M1/M3, and Mossberg 500 series shotgun.

Please note to our customers outside the United States, these adapter plates have been listed under the U.S. Munitions lists. 


Collapsible Stock M-4/AR-15 rifle


We carry several different adapter plates for the M4/CAR style rifle.

Our latest addition to our M4 Adapter plates requires only the removal of the collapsible butt stock. The UM4 adapter plate slides over the buffer tube and fits against the castle nut. It is secured by a screwed pin on the bottom. This adapter plate may interfere with the inner most position of the stock locking in position.



UM4 2



Price: $29.95

Order Button



Several of our plates replace the factory plate at the rear of the lower receiver. This requires some disassembly of the rifle. We carry three versions of this plate.

Sling Adapte Plate, Collapsible Stock

Above Plate has a round connector for snap hook type attachment, and a 1 1/4 inch slot for webbing .


Adapter Plate below has only loops. Price: $14.95.

Loop only, CAR adapter plate

The other plate is designed for right hand shooter only and has one loop on the left side. Price: $14.95

Right Hand, CAR

For more information or to order, go here


We now carry the Midwest Industries End Plate Adapter. This adapter fits over the buffer tube of a collapsible stock M-4/AR-15. Installation requires only the removal of the shoulder stock and sliding the adapter over the buffer tube and the castle nut. Tighten the hex nut down with the supplied allen wrench. Re-install the shoulder stock portion to finish.


MCTAR13$35.95Plate Mounted



The fixed stock version is available for either right or left handed shooters. The Adapter Plate is 1/4 inch wide and will add this to the length of the stock. A longer screw for the buttstock is supplied. Please specify right or left handed shooter. Price: $34.95

Fixed stock adapter plate


Shotgun Adapter Plates

For the Benelli M1/M3/Super 90, Mossberg 500 series and Remington 870 we have adapter plates with a single loop for right or left handed as well as an ambidextrous plate.  These mount between the receiver and stock. The ambi plates are recommended for shotguns with pistol grip stock due to the location of the sling mount may interfere with normal gripping of the standard stock.

Shotgun Plates




We carry the GGG front sling adapter. This mounts at the front of the tubular magazine, either right or left side, and allows attachment of 2 or 3 point slings. This mounts sling away from the shotgun, allowing space for pump action or light system without interference.

Front Shotgun sling mount

Price: $12.95

For more information and to order,  click here.